|
|
|
Specification |
|
Type |
KSF-700-TL |
KSF-1000-TL |
|
Inlet / outlet |
DN65 PN16 |
DN80 PN16 |
|
Vent |
Internal thread Rp 1/8" |
|
Drain |
Internal thread Rp 2" |
|
Housing material |
Stainless steel 1.4571 |
|
Wedge wire material |
Stainless steel 1.4435 |
|
Housing gasket |
FPM
(other materials optional) |
|
Max. operat. pressure |
10
bar |
|
Max. temperature |
up to 200°C |
|
Micron rates |
35 up
to 3000 µm |
|
Confirmation |
DGRL
2014/68/EU I Cat.I, module A (CE) |
|
Volume |
15
L |
26,5
L |
|
Flow rate performance |
<
25 m3/h |
<
35 m3/h |
|
Electrical connection |
400
V, 50 Hz (IP54 / IP65) I ATEX optional |
|
Overview brochure |
PDF-DOWNLOAD |
|
Brief description:
The self-cleaning filters of the series KSF-700-TL and
KSF-1000-TL exist of a removable gear lid unity and a filter
case. Both parts are connected with eye-bolt screws with each other. The one and escape carbine is height-moved and arranged oppositely. The complete scraper unity can be taken without tools. Moreover the lid must be solved and be taken off with the mounted gear engine unity. The attacking dirt is collected in the lower part of the case and must be let down in certain distances. The system of our selbstreinigenden filters exists of a VProfil which is welded in a precisely defined distance on circularly arranged supporting profiles. Through this originates a firm, in itself stable gap pipe. A Verblockung of the free filter surface is avoided by the used V profile.
Normally the case is equipped with a height adjustable base. Optionally also with welded
lugs
available. If requested can be equipped of the filters also with heating jacket. |
The Benefits from Self-Cleaning Wedge Wire Filters |
► NO DISPOSAL
PROBLEMS |
►
SELF-CLEANING
WITHOUT OPERATING STOP |
► FAST AND
EASY CLEANING BY COMPLETE REMOVABLE FILTER SUPPORT |
► LOW OPERATING
PROCESS DUE TO LONG SERVICE LIFE |
► ROBUST AND
OPERATER FRIENDLY TWO-PART HOUSING |
► EASY AND
TIME-SAVING SERVICE |
►
MICRON RATES FROM 35 µm |
► ON REQUEST
WITH TÜV-APPROVAL, EX-PROTECTION, SPECIAL MATERIALS |
Filter Design KSF-700-TL/1000-TL |
The filter systems are designed for extremely stable and robust
applications. They consist
essentially of the following components:
Two-piece filter housing, wedge wire element,
holding plate with
scraper gear drive. The filtration is through the wedge wire element
from
outside to inside, wherein the solids accumulate on the outside
of the wedge wire element.
The rotating filter element will be cleaned by fixed scraper plate.
The solids setting out to the
bottom of the filter housing and are drained
by the system pressure via a ball valve.
Optionally, the draining of solids can also be carried out automatically
by an electronic
controller with differential pressure control and
solenoid valve.
Blocking of the filter element is
impossible as expand the trapezoidal
columns inward.
The micron rating is determined by the
gap width of the filter element.
The filter element can be replaced without special tools.
|
|
Applications areas KSF-700-TL/1000-TL |
► Paintings and varnish |
► Industrial waste
water |
► Inks |
► Oil and fuels |
► Dispersion colors |
► Emulsions |
► Glues |
► Sludge |
► Underseal |
► Food and beverage |
► Solvents |
►
Chocolate mass |
|