|
|
|
Specification |
|
Type |
KSF-1FU(C)-10 |
KSF-1FU(C)-20 |
|
Inlet / Outlet (N1/N2) |
Internal thread Rp 1" |
|
Vent / Flush |
Internal thread Rp 1/4" |
|
Drain |
External thread R 1" |
|
Housing material |
Stainless steel 1.4301 I Alt. 1.4401 |
|
Filter element material |
Stainless steel 1.4301 |
|
Housing gasket |
FPM
(other materials optional) |
|
Max. operat. pressure |
25
bar |
|
Max.
operat. temperature |
up to 160°C |
|
Micron rate |
1 up
to 3000 µm |
|
Confirmation |
DGRL
2014/68/EU I Art.4, §3 (PED) |
|
Volume |
1.8
L |
2.9
L |
|
Flow rate > 500 µm |
4.5 m3/h |
|
Flow rate 100 µm |
2.0 m3/h |
4.0 m3/h |
|
Flow rate 1 µm |
1.0 m3/h |
2.0 m3/h |
|
Electrical version
Type: AU |
230V,
50(60) Hz, 20 W, IP65 |
|
Manuel version
Type: MA |
manually driven by hand wheel |
|
Pneumatical version
Type: RA |
horicontal mounted cylinder |
|
Overview brochure |
PDF-DOWNLOAD |
|
Brief description:
The basis of this development is the patented and proven
cartridge filter housing of the 1FU series (screwed closure) and
the 1FUC series (with quick closure). When converting from the
cartridge filter to the automatic filter, the cast part of the filter
head was modified to create a connection between the drive and
the filter element. Also in terms of dead spaces and flow
behavior, acuraWedge self-cleaning filters set new standards.
The free choice of the closure enables use in many areas of
industry, since all common sealing materials can be selected,
e.g. NBR; EPDM; FPM; FEP-O-SEAL, core FPM; FFKM;
GYLON blue. The drive shaft is not sealed with a stuffing box
packing, but with a low-maintenance 3D driveshaft sealing.
Annoying readjustments are therefore no longer necessary to
guarantee optimal tightness.
A new type of sintered filter element is just as revolutionary,
which absolutely guarantees crystal clear filtration of 1 μm (> 25 μm can only be applied to this sintered element). The
maximum flow of size 10 at 100 μm is 2 m³ / h and at 1 μm up
to 1 m³ / h based on water. |
The Benefits from Self-Cleaning Wedge Wire Filters
/ Sinter Filter Units |
► NO DISPOSAL
PROBLEMS |
►
SELF-CLEANING
WITHOUT OPERATING STOP |
► FAST AND
EASY CLEANING BY COMPLETE REMOVABLE FILTER SUPPORT |
► LOW OPERATING
PROCESS DUE TO LONG SERVICE LIFE |
► ROBUST AND
OPERATER FRIENDLY TWO-PART HOUSING |
► EASY AND
TIME-SAVING SERVICE |
►
MICRON RATES FROM 1 µm |
► ON REQUEST
WITH TÜV-APPROVAL, EX-PROTECTION, SPECIAL MATERIALS |
Filter Design KSF-1FU(C) |
The filter systems are designed for extremely stable and robust
applications. They consist
essentially of the following components:
Two-piece filter housing, filter element , holding plate
with scraper gear drive (AU/MA/PN). The filtration is through the wedge wire
element
(25 - 1000 μm) or sintered element (1 μm) from outside to
inside, wherein the solids
accumulate on the outside of the filter element.
The rotating filter element will be cleaned by
fixed scraper plate.
The solids setting out to the bottom of the filter housing and are
drained by
the system pressure via a ball valve.
Optionally, the draining of solids can also be carried out
automatically
by an electronic controller with differential pressure control and
solenoid valve.
Blocking of the filter element is impossible as expand the trapezoidal
columns inward.
The micron rating is determined by the gap width of
the wire filter element or the pore size of
the sintered element.
The filter element can be replaced with the included opening lever set.
|
|
Applications areas KSF-1FU(C) |
► Paintings and varnish |
► Industrial waste
water |
► Inks |
► Oil and fuels |
► Dispersion colors |
► Emulsions |
► Glues |
► Sludge |
► Underseal |
► Food and beverage |
► Solvents |
►
Chocolate mass |
|