|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Brief description: The self-cleaning filters of series KSF-400 up to KSF-1000 made of an upper and a lower part. Both parts are connected with a quick clamp optionally with bracket screws together. The inlet and outlet are offset in height and are located opposite one another. The fixed scraper plate is mounted on the adjustable scraper element and have a low-maintenance. The drive of the filter element is effected by a geared motor. The resulting debris are collected in the lower part of the housing and will drained at intervals. The system of our self-cleaning filter is made of a V-profile which is welded in a precisely defined spacing on a circle of supporting profiles. This creates a solid, stable in themselves wedge wire element. Using a V-profile avoids a blocking of the free filter surface. The continuous cleaning of the rotating element is performed by a fixed scraper plate. The elements are available in micron ratings 35 up to 3000 μm. |
| The Benefits from Self-Cleaning Wedge Wire Filters |
| ► NO DISPOSAL PROBLEMS |
| ► SELF-CLEANING WITHOUT OPERATING STOP |
| ► FAST AND EASY CLEANING BY COMPLETE REMOVABLE FILTER SUPPORT |
| ► LOW OPERATING PROCESS DUE TO LONG SERVICE LIFE |
| ► ROBUST AND OPERATER FRIENDLY TWO-PART HOUSING |
| ► EASY AND TIME-SAVING SERVICE |
| ► MICRON RATES FROM 35 µm |
| ► ON REQUEST WITH TÜV-APPROVAL, EX-PROTECTION, SPECIAL MATERIALS |
| Filter Design KSF-400/700/1000 | |
|
The filter systems are designed for extremely stable and robust applications. They consist essentially of the following components: Two-piece filter housing, wedge wire element, holding plate with scraper gear drive. The filtration is through the wedge wire element from outside to inside, wherein the solids accumulate on the outside of the wedge wire element. The rotating filter element will be cleaned by fixed scraper plate. The solids setting out to the bottom of the filter housing and are drained by the system pressure via a ball valve. Optionally, the draining of solids can also be carried out automatically by an electronic controller with differential pressure control and solenoid valve. Blocking of the filter element is impossible as expand the trapezoidal columns inward. The micron rating is determined by the gap width of the filter element. The filter element can be replaced without special tools. |
 |
| Applications areas KSF-400/700/1000 | |
| ► Paintings and varnish | ► Industrial waste water |
| ► Inks | ► Oil and fuels |
| ► Dispersion colors | ► Emulsions |
| ► Glues | ► Sludge |
| ► Underseal | ► Food and beverage |
| ► Solvents | ► Chocolate mass |