|
|
|
Specification |
|
Model type "E" |
Elasto
wedge wire supports |
|
Model type "V" |
V-wedge wire elements |
|
Inlet / outlet |
up to DN300 |
|
Flow rate performance |
up to 10.000 m3/h |
|
Housing material |
Stainless steel |
|
Max. operat. pressure |
up to 40
bar |
|
Max. temperature |
up to 80°C |
|
Micron rates |
from 50 µm up to 3000
µm |
|
Confirmation |
DGRL
97/23/EG I Art.3, §3 (PED) |
|
TÜV approval |
on request |
|
EX protection |
on request |
|
Special materials |
on request |
|
The Benefits from Automatic Back-Washing Filter Untis |
►
NO DISPOSAL
PROBLEMS |
►
SELF-CLEANING
WITHOUT OPERATING STOP |
►
Selective with elasto wedge
wire or v-wedge wire elements |
►
Low pressure loss and high
flow rates |
►
Long service life and short
back-washing time |
►
small waste water value - low
operating costs |
► ON REQUEST
WITH TÜV-APPROVAL, EX-PROTECTION, SPECIAL MATERIALS |
Application Areas of Automatic Back-Washing Filter |
► Cooling water circles
in the main and bypass flow |
► River water,
sea water, font water |
► Sludge water,
emulsions, process water |
► Pump lubrication
liquids |
► Mine water |
Filter Design of the Automatic Back-Washing Filter |
The medium to be filtered becomes by the finish carbine in
raw
water space
of the filter promoted, flows through on the hole disc to fastened filter
cartridges
and resigns cleaned by the outlet carbine.
The automatic breather produces
possible aerial inclusions and gas inclusions.
The pollutions are held back
within the filter cartriges and
generate an increasing flow opposition.
As soon
as a pressure difference opposed in the difference push button switch reaches
or a preselected time has run out, becomes the automatic one
own medium
back rinse released.
The back-washing rotor goes without business
interruption successively under everybody
filter cartridges, so that with at the
same time open back-washing valve all filter cartridges
successively by
current return with filtered own medium
back-rinsed become.
After a full rotation of the back-washing rotors is
the process finishes and
closes the back-washing valve.
Picture Index
1 Hole plate 5
Automatic venting unit
2 Filter cartridge 6
Differential pressure indicator
3 Washing rotor 7
Back washing-valve
4 Engine
8 Housing lid |
|
Elasto-Wedge Wire Cartridges |
Breathing Elasto
wedge wire cartridges have precisely defined
filter column, which to itself with the back-washing flow grows.
Thereby
if become also stuck border grain particle as well as
fibrous one
suspended matter and solids strictly back-rinsed and
do not lead
to blockage to be remained. Back-washing filters
with these
to dynamic filter elements are extremely reliable in
service and
maintenance-free.
Filter micron rates: 50 µm to 1 mm
Material: Polypropylen
|
|
V-Wedge Wire Cartridges |
Stiff V gap-filter cartridges are respectable standard elements
with
to exact V-shaped filter columns, before which to itself them
to pollutions to be produced deposit.
By the back rinsing in
reverse direction becomes in the V columns
a high
back-washing flow generates, so that before him
filter columns
to mature solids reliably are removed.
Filter micron rates: 50 µm to 3 mm
Material: High-grade steel
|
|
|