|
|
|
Specifikation |
|
Type |
KSF-240 K |
|
Inlet / Outlet (N1/N2) |
Internal thread Rp 1" |
|
Vent |
Internal thread Rp 1/8" |
|
Drain |
External thread R 3/4" |
|
Housing material |
Stainless steel 1.4301 |
|
Wedge wire material |
Stainless steel 1.4435 |
|
Housing gasket |
FPM
(other materials optional) |
|
Max. operat. pressure |
16
bar |
|
Max.
operat. temperature |
up to 200°C |
|
Micron rates |
35 up
to 3000 µm |
|
Confirmation |
DGRL
2014/68/EU I Art.4, §3 (PED) |
|
Volumen |
1,5
L |
|
Flow rate performance |
<
3,5 m3/h |
|
Electrical connection |
400
V, 50 Hz (IP54) I ATEX optional |
|
Overview brochure |
PDF-DOWNLOAD |
|
Brief description:
The self-cleaning filters of series KSF 240 K made of an upper
and a lower part. Both parts are connected with a quick clamp
together. The inlet and outlet connection are located on the
upper part of the wedge wire filter. The fixed scraper plate is
mounted on the adjustable scraper element and have a lowmaintenance.
The drive of the filter element is effected by a
geared motor. The resulting debris are collected in the lower part
of the housing and will drained at intervals. The system of our
self-cleaning filter is made of a V-profile which is welded in a
precisely defined spacing on a circle of supporting profiles. This
creates a solid, stable in themselves wedge wire element. Using
a V-profile avoids a blocking of the free filter surface.
The continuous cleaning of the rotating element is performed by
a fixed scraper plate.
The elements are available in micron ratings 35 up to 3000 μm. |
The Benefits from Self-Cleaning Wedge Wire Filters |
► NO DISPOSAL
PROBLEMS |
►
SELF-CLEANING
WITHOUT OPERATING STOP |
► FAST AND
EASY CLEANING BY COMPLETE REMOVABLE FILTER SUPPORT |
► LOW OPERATING
PROCESS DUE TO LONG SERVICE LIFE |
► ROBUST AND
OPERATER FRIENDLY TWO-PART HOUSING |
► EASY AND
TIME-SAVING SERVICE |
►
MICRON RATES FROM 35 µm |
► ON REQUEST
WITH TÜV-APPROVAL, EX-PROTECTION, SPECIAL MATERIALS |
Filter Design KSF-240 K |
The filter systems are designed for extremely stable and robust
applications. They consist
essentially of the following components:
Two-piece filter housing, wedge wire element,
holding plate with
scraper gear drive. The filtration is through the wedge wire element
from
outside to inside, wherein the solids accumulate on the outside
of the wedge wire element.
The rotating filter element will be cleaned by fixed scraper plate.
The solids setting out to the
bottom of the filter housing and are drained
by the system pressure via a ball valve.
Optionally, the draining of solids can also be carried out automatically
by an electronic
controller with differential pressure control and
solenoid valve.
Blocking of the filter element is
impossible as expand the trapezoidal
columns inward.
The micron rating is determined by the
gap width of the filter element.
The filter element can be replaced without special tools.
|
|
Applications areas KSF-240 K |
► Paintings and varnish |
► Industrial waste
water |
► Inks |
► Oil and fuels |
► Dispersion colors |
► Emulsions |
► Glues |
► Sludge |
► Underseal |
► Food and beverage |
► Solvents |
►
Chocolate mass |
|