Self-Cleaning Filters
Self-Cleaning Wedge Wire Filters
Self-Cleaning Air Wedge Wire Filters
FMC-FB-03
Separators
Automatic Back-Washing Filter
Self-Cleaning Air Wedge Wire Filter
Product InfoDimensionsDocumentationCAD-DataSpare PartsAccessories
 
 
   
   
   
   Specification
    Type FMC-FB-03
    Inlet / outlet TC40 DIN
    Drain Rp 1 1/2" 
    Vent Rp 1/4" 
    Flow rate performance up to 3,8 m3/h
    Housing material Stainless steel 1.4301
    Gaskets FPM 
    Scraper ring PTFE 
    Max. operat. pressure 10 bar
    Max. temperature -10/+80°C
    Micron rates from 50 µm up to 3000 µm
    Confirmation DGRL 2014/68/EU I Art.4, §3 (PED)
    Movement Compressed air KS-4
    Compressed air connect 4 - 6 bar 
    EX protection on request
    Overview brochure PDF-DOWNLOAD

Brief description:
The pneumatic self-cleaning filters of the FMC-FB-03 consist of an upper and a lower part. The inlet and outlet are located on the lower part of the edge-split filter. The drive of the filter takes place by a pneumatic control unit, which allows continuous cleaning, as well as a manually controlled drain of a button. The resulting debris are collected in the lower part of the housing and can be drained at intervals. Optionally, the drain can be fitted with a timer, which ensures a drain interval. The cleaning of the wedge wire element occurs by to itself vertically, even pressing, moving scraper ring. Default are supplied a height-adjustable legs, a compressed air maintenance unit with pressure reducer and a tool for assembling and disassembling of the wedge wire element. In addition there are two connections for differential pressure gauge. Optionally, the system is also available with EX approval.

 The Benefits from Self-Cleaning Air Wedge Wire Filters
  NO DISPOSAL PROBLEMS
  SELF-CLEANING WITHOUT OPERATING STOP
  FAST AND  EASY CLEANING BY COMPLETE REMOVABLE FILTER SUPPORT
  LOW OPERATING PROCESS DUE TO LONG SERVICE LIFE
  ROBUST AND OPERATER FRIENDLY TWO-PART HOUSING
  EASY AND TIME-SAVING SERVICE
  ON REQUEST WITH TÜV-APPROVAL, EX-PROTECTION, SPECIAL MATERIALS

 Application Areas of Compressed Air Wedge Wire Filters
  Waste water
  Sludge water, emulsions, process water
  Food and beverage
  Paints and varnish
  Solvents

 Filter Design of Compressed Air Wedge Wire Filters
  The filter system is extremely stable and laid out for robust applications. There is in essential
  from the following components: Two-part filter case, gap pipe element, renderer with
  cleansing ring and control unity with piston rod cylinder and drain valve. The filtration occurs
   through the gap pipe from the inside outwardly and you the solids in of the inside of the gap
  pipe element take up. By means of a renderer this becomes Filter element by ON and from
  movements separated. Besides, the solids sit down in the lower part of the filter case from
  and become by the system pressure about one pneumatic ball cock delivered. Optionally the
  indulgence with a tact giver can be postprepared, which one Interval indulgence guarantees.

  Adding the filter element is excluded itself practically, because the columns trapezoid-shaped
  outwardly extend. The filter delicacy is determined by the gap width of the filter element.
  The filter element can be changed with the tools contained in the scope of supply.