|
|
|
Specifications |
|
Material membrane |
PTFE Polytetrafluorethylene (hydrophobic) |
|
Material support core / end caps |
Polypropylene |
|
O-ring materil of adaptor cartridges |
Silicone, Fluor carbone, EPR, Nitrile and FEP |
|
Max. operating temperature |
95°C |
|
Max. differential pressure |
5,6 bar at 20°C |
|
Max. differential pressure |
1,4 bar at 95°C |
|
Pre-rinsing |
30 min. at 18
MW water at 8 l/m |
|
Sterilization in autoclave |
30 min. at
121°C, 10 times |
|
Internal diameter |
nom. 28 mm |
|
External diameter |
nom. 69 mm |
|
Filter area |
0,9m2/
10" filter cartridge |
|
Absolute retention rates (99,9%) |
0,05, 0,1, 0,2,
0,45 and 1,0 µm |
|
Deliverable cartridge lengths |
4,87", 9 3/4", 10", 19
1/2", 20", 29 1/4", 30", 40" |
|
Overview brochure |
PDF-DOWNLOAD |
|
.
> All materials are certified acc. USP XXIII and FDA CFR part
21< |
The Benefits of the acuraVent
AVF-ST |
► HYDROPHOBIC
PTFE-MEMBRANE
- 80 - 95% pore value - high flow rates - extrem long service
life |
► LARGE
FILTER AREAS - 0,9 m² per 10" for effective particle
retention by a low differential pressure |
► THERMICAL
WELDING DESIGN - connections of the end caps as well as
adaptors freely from glues or binding agent |
► MADE IN THE PURE SPACE -
pre-rinsed with 18 MW DI-water |
► FDA PROOFED
MATERIAL - certificated acc. USP XXIII and FDA CFR
part 21. |
► HUGE
PROGRAM - 5 retention rates from 0,05 up to 10 µm, as well as different construction lengths to 40" and all customary
end caps or adaptor configurations guarantee an optimum solution for many filtration uses. |
*als Option auch hydrophil lieferbar |
Filter design acuraVent
AVF-ST |
Pleated acuraVent AVF-ST membrane filter
cartridges are produced from hydrophobical
membrane PTFE in a Polypropylene supporting cage.
A wide chemical permanence is guaranteed by this candle construction with many ranges
of application of the chemical industry.
By the towards common filter cartridges around up to 40% bigger filter surface as
well as a pore portion from up to 95% the acuraVent AVF-ST reaches membrane filter
cartridges an extremely long state time with a low difference pressure. |
|
Application areas acuraVent
AVF-ST |
► Solvents, strong
acids, caustic and stripper |
► DI-water |
► Photo emulsions and
chemicals |
► Manufaturing of
charging devices |
► Fine chemicals |
► Tank aeration |
► Process solvents |
|
Integrity test |
Micron rate |
Bubble Point |
Diffusion test |
0,05 µm |
>1,25 bar |
< 40 ml/min at 1,10 bar |
0,10 µm |
>0,97 bar |
< 20 ml/min at 0,78 bar |
0,20 µm |
>0,83 bar |
< 20 ml/min at 0,66 bar |
0,45 µm |
>0,55 bar |
< 52 ml/min at 0,45 bar |
1,00 µm |
- |
- |
IPA: H2O = 60 : 40 |
|
|
Ordering informations acuraVent
AVF-ST |
Type |
Size |
Pre-rinsing |
Integrity |
Adaptor |
Gasket |
Micron rate |
AVF-ST
=
acuraVent AVF-ST |
04 = 4,87"
09* =
9 3/4"
10 = 10"
19* = 19 1/2"
20 = 20"
29* = 29 1/4"
30 = 30"
40 = 40"
* only deliverable
for adaptor F1 |
S
=
pre-rinsed |
I
=
tested |
F0 = both sides open
with end caps
F2 = one side open
Code3 (222)
F3 = one side open
with fin Code 8
(222)
F4 = one side open
(226)
F5 = one side open
with fin Code 7
(226) |
N = NBR
E = EPDM
F = FPM
P = PTFE
S = FEP/FPM
Q = MVQ |
99,9%
retention rate
005 = 0,05 µm
010 = 0,10 µm
020
= 0,20 µm
045 = 0,45 µm
100 = 1,00 µm |
Ordering sample marked combination:
AVF-ST-09SI-F3Q-020 |
|