|
|
|
Specifications |
|
Material membrane |
PES Polyethersulfone (hydrophilic) |
|
Material support core / end caps |
Polypropylene |
|
O-ring material of adaptor cartridges |
Silicone, Fluor carbone, EPR, Nitrile and FEP |
|
Max. operating temperature |
80°C |
|
Max. differentail pressure |
5,5 bar at 20°C |
|
Max. differntial pressure |
1,7 bar at 80°C |
|
Pre-rinsing |
30 min. at 18
MW water at 8 l/m |
|
Steam sterilization |
30 min. at
121°C, 10 times |
|
Sterilization in autoclave |
30 min. at
121°C, 10 times |
|
Cleaning with hot water |
30 min. at 80°C,
30 times |
|
Internal diameter |
nom. 28 mm |
|
External diameter |
nom. 69 mm |
|
Filter area |
0,55m2/
10" filter cartridge |
|
Absolute retention rates (99,9%) |
0,04, 0,1, 0,2,
0,45, 0,65 and 1,2 µm |
|
Deliverable cartridge lengths |
4,87", 9 3/4", 10", 19
1/2", 20", 29 1/4", 30", 40" |
|
Overview brochure |
PDF-DOWNLOAD |
|
.
> All materials are certified acc. USP XXIII and FDA CFR part
21< |
The Benefits of the acuraFine
AFS-ST |
► ASYMMETRICAL
STRUCTURE - absolute retention rates - high flow rates
- extrem long service life |
► PERMANENT
HYDROPHILIC POLYETHERSULFON MEMBRANE - no aditives or
post operation neccessary |
► THERMICAL
WELDING DESIGN - connections of the end caps as well as
adaptors freely from glues or binding agent |
► MADE IN THE PURE SPACE -
pre-rinsed with 18 MW DI-water |
► FDA PROOFED
MATERIAL - certificated acc. USP XXIII and FDA CFR
part 21. |
► HUGE
PROGRAM - 6 retention rates from 0,04 up to 1,2 µm, as well as different construction lengths to 40" and all customary
end caps or adaptor configurations guarantee an optimum solution for many filtration uses. |
Filter design acuraFine
AFS-ST |
The pleated acuraFine AFS-ST membrane filter
cartridges are produced of a Polyethersulfone
membrane in a Polypropylene supporting cage.
A low difference pressure is also guaranteed with high assembly-line rates by the
asymmetrical membrane structure by which, in addition, an extremely long state time of
these membrane filter cartridges is reached.
The acuraFine AFS-ST
membrane filter cartridges own an excellent chemical permanence
and can be used therefore in many areas of the fine chemistry as well as food and drinks
industry. |
|
Application areas acuraFine
AFS-ST |
► Photo resist |
► DI-water |
► Pure water |
► Cosmetics |
► Fine chemicals |
► Food and beverage |
► Process solvents |
|
Integrity test |
Micron rate |
Bubble Point |
Diffusion test |
0,04 µm |
3,1 bar |
< 25 ml/min at 4,5 bar |
0,10 µm |
2,3 bar |
< 40 ml/min at 4,5 bar |
0,20 µm |
2,6 bar |
< 35 ml/min at 2,1 bar |
0,45 µm |
2,1 bar |
< 20 ml/min at 4,5 bar |
0,65 µm |
1,2 bar |
< 20 ml/min at 0,9 bar |
IPA: H2O = 60 : 40 |
|
|
Ordering informations acuraFine
AFS-ST |
Type |
Size |
Pre-rinsing |
Integrity |
Adaptor |
Gasket |
Micron rate |
AFS-ST
=
acuraFine AFS-ST |
04 = 4,87"
09* =
9 3/4"
10 = 10"
19* = 19 1/2"
20 = 20"
29* = 29 1/4"
30 = 30"
40 = 40"
* only deliverable
for adaptor F1 |
S
=
pre-rinsed |
I
=
tested |
F0 = both sides open
with end caps
F2 = one side open
Code3 (222)
F3 = one side open
with fin Code 8
(222)
F4 = one side open
(226)
F5 = one side open
with fin Code 7
(226) |
N = NBR
E = EPDM
F = FPM
P = PTFE
S = FEP/FPM
Q = MVQ |
99,9%
retention rate
004 = 0,04 µm
010 = 0,10 µm
020
= 0,20 µm
045 = 0,45 µm
065 = 0,65 µm
120 = 1,20 µm |
Ordering sample marked combination:
AFS-ST-09SI-F3Q-020 |
|