|
|
|
Specifications |
|
Materials |
Polyamide (Nylon) |
|
O-ring material for adaptor cartridges |
Silicone, Fluorcarbone, EPR, Nitrile
and FEP |
|
Max. operating temperature |
125°C |
|
Max. differential pressure 1 - 25 µm |
2,5 bar |
|
Max. differential pressure 50 - 100 µm |
1,0 bar |
|
Internal diameter |
nom. 28 mm |
|
External diameter |
nom. 63 mm |
|
Nominal retention rate (80%) |
1, 5, 10, 25,
50, 75 and 100 µm |
|
Deliverable cartridge lengths |
9 3/4", 10", 19
1/2", 20", 29 1/4", 30", 39", 40" |
|
Overview brochure |
PDF-DOWNLOAD |
|
.
The Benefits of the acuraPure |
► The patented Melt-Blown technology guarantees reproduceable filtration results. |
► By an internal supporting core supported matrix. The filter candle thereby receives a high pressure stability. |
► Retention rates (90%)
from 1 up to 100 µm |
► Thermo-sculptural production without addition of glue or binding agent. |
► Completely from polyamide, for a high temperature loading capacity |
Filter design acuraPure |
acuraPure depth filter
cartridges are produced in a patented Melt-Blown procedures. The infinitely variable inwards increasing
pore structure allows a good particle back position as well as high dirty admission capacity. 90%
retention rate guarantees
reproduceable filtration results. The matrix provided with an internal supporting core also guarantees with rising difference
pressure a constant high efficiency. acuraPure thinks her application primarily where Polypropylene cannot be used and a higher
temperature permanence is demanded. |
Application ares acuraPure |
► DI- and pure water |
► Acids and leys |
► Process- and
waste water |
► Solvents, reagent and
puffer |
► Surface baths and
fine chemicals |
► Petro chemical |
► Photo resist |
► Cosmetics |
► Varnish and paints |
► Pre-filtration of
pharmaceutical products |
► Printing colors and
inks |
► Food and beverage |
Ordering informations acuraPure |
Type |
Size |
Material |
Class |
Adaptor |
Gasket |
Micron rate |
APN
=
acuraPure |
09* =
9 3/4"
10 = 10"
19* = 19 1/2"
20 = 20"
29* = 29 1/4"
30 = 30"
39* = 39"
40 = 40"
* only deliverable
for adaptor F1 |
N
=
Polyamide |
1
=
PA-core |
F0 = both sides open
with end caps
F1 = both sides open
F2 = one side open
Code3 (222)
F3 = one side open
with fin Code 8
(222)
F4 = one side open
(226)
F5 = one side open
with fin Code 7
(226) |
A =
without
N = NBR
E = EPDM
F = FPM
P = PTFE
S = FEP/FPM
Q = MVQ |
99,9%
retention rate
001 = 1 µm
005 = 5 µm
010 = 10 µm
025 = 25 µm
050 = 50 µm
075 = 75 µm
100 = 100 µm |
Ordering sample marked combination:
APN-09N1-F1A-010 |
|