Specifications     Material Series PP Polypropylene and Polyethylene lining     Material Series PS Polyester and Copolymer Polyester lining     O-ring material for adaptor cartridges Silicone, Fluorcarbone, EPR, Nitrile and FEP     Max. operating temperature Series PP 80°C     Max. operating temperature Series PS 120°C     Max. differential pressure at 20°C 5,5 bar     Recom. changing differential pressure 2,5 bar     Internal diameter nom. 27 mm     External diameter nom. 64 mm     Nominal retention rate (80%) 5, 10, 25, 50, 75, 100, 125 and 200 µm     Deliverable cartridge lengths 9 3/4", 10", 19 1/2", 20", 29 1/4", 30", 40"   Overview brochure PDF-DOWNLOAD .  The Benefits of the acuraBond   ► ROBUST AND SELF-FIXING - In the inside the fibers welded together in very high density with each other prove a firm structure        which admit a difference pressure of 5.5 bar and make an additional supporting body superfluous.   ► HIGH FLOW RATES - Controlled pore structure with high permeability prove unusual low pressure loss and high flow rates.   ► LONG SERVICE LIFE - the depth filter structure, the low pressure loss and the high pressure permanence protect the filtration       result and reduce the operating expenses by long state times.   ► WIDE CHEMICAL RESISTANCE COMPATIBILITY - this allows the acuraBond application for the filtration of the most       different liquids.   ► HUGE PROGRAM - 5 retention rates from 5 up to 200 µm, as well as different construction lengths to 40" and all customary       end caps or adaptor configurations guarantee an optimum solution for many filtration uses.  Filter design acuraBond   The newest technological production procedures during the fiber production made the   development of these long bi-component fibres which exist by a core of Polypropylene and a   sheath from Polyethylene (type PP) or polyester with co-polymer-polyester cover (type HP),   only possibly. The fibers can be welded together by the different glaze points of these two   different materials in her crossroad points with each other thermally, without a shrivelling of   the Polypropylene (polyester) and therefore the filter matrix must be accepted. This process   requires no net means or binding agent. The construction-conditioned structural high   firmness protects steady filtration qualities also under high axial pressure.  Application areas acuraBond   ► Varnish and covering   ► Oxidation baths   ► Drinking water   ► Inks and colors   ► Pharmaceutical products   ► Plastics   ► Cosmetics and food   ► Organical solvents (alcohol etc.)   ► Process water   ► Arenes   ► Photo emulsions   ► Magnet band suspensions  Ordering informations acuraBond Type Size Material Class Adaptor Gasket Micron rate ACB = acuraBond   09 = 9 3/4"   10 = 10"   19 = 19 1/2"   20 = 20"   29 = 29 1/4"   30 = 30"   40 = 40" PP = Polypropylene PS = Polyester 1 = one layer   F1 = both sides open   F2 = one side open            Code3 (222)   F3 = one side open            with fin Code 8 (222)   F4 = one side open            (226)   F5 = one side open            with fin Code 7 (226)   A = without   N = NBR   E = EPDM   F = FPM   P = PTFE   S = FEP/FPM   Q = MVQ   80% nom.   retention rate     005 =     5 µm   010 =   10 µm   025 =   25 µm   050 =   50 µm   075 =   75 µm   100 = 100 µm   125 = 125 µm   200 = 200 µm  Ordering sample marked combination: ACB-09PP1-F1A-010  Suitable filter housings Profit from our long-standing experience with the interpretation of filter systems! We lay out your filter according to economic and economic criteria free of charge.