|
|
|
Specifications |
|
All used materials |
Polypropylene |
|
O-ring material for adaptor cartridges |
Silicone, Fluorcarbone, EPR, Nitrile and FEP |
|
Max- operating temperature |
80°C |
|
Max. differential pressure at 20°C |
4,2 bar |
|
Max. differential pressure at 60°C |
2,1 bar |
|
Max. differential pressure at 80°C |
1,2 bar |
|
Recom. changing differential pressure |
2,1 bar at 30°C |
|
Internal diameter |
nom. 28 mm |
|
External diameter |
nom. 63 mm |
|
Absolute retention rate (99,9%) |
1, 3, 5, 10, 25,
50, 75 and 100 µm |
|
Deliverable cartridge lengths |
9 7/8", 10", 19
1/2", 20", 29 1/4", 30", 39", 40" |
|
Overview brochure |
PDF-DOWNLOAD |
|
.
> All materialis are certified acc. NSF 42 and FDA CFR part
21< |
The Benefits of acuraPromelt |
► The unique surface construction distributes the product stream in the
depth filter structure and provides therefore for a
low difference pressure. |
► By the stable matrix the filter
cartrisge receives a high pressure stability. |
► Absolute retention
rates from 1 up to 100 µm (Beta Ratio β = 1000). |
► Thermo-sculptural production without addition of glue or binding agent. |
► Completely from Polypropylene, without additional supporting body - no fiber release. |
► Certified acc. NSF 42
and FDA CFR part 21 |
Filter design acuraPromelt |
acuraPromelt depth filter
cartridges are produced in a patented Melt-Blown procedures.
The unique surface construction linkedly with the inwards increasing pore structure allow a
good particle back position as well as high dirty admission capacity.
The absolute
retention rate (beta Ratio β = in 1000) guarantees reproduceable ones
Filtration results.
The exceptionally stable matrix also guarantees with rising difference pressure a constantly
high efficiency. This allows the application acuraPromelt
in many critical applications in all
industrial sectors. |
|
Application ares acuraPromelt |
► DI- and pure water |
► Acids and leys |
► Process- and
waste water |
► Solvents, reagent and
puffer |
► Surface baths and
fine chemicals |
► Movie and
paper covering |
► Photo resist |
► Cosmetics |
► Varnish and paints |
► Pre-filtration of
pharmaceutical products |
► Printing colors and
inks |
► Food and beverage |
Ordering informations acuraPromelt |
Type |
Size |
Material |
Class |
Adaptor |
Gasket |
Micron rate |
APM
=
acuraPromelt |
09* =
9 7/8"
10 = 10"
19* = 19 1/2"
20 = 20"
29* = 29 1/4"
30 = 30"
39* = 39"
40 = 40"
* only deliverable
for adaptor F1 |
P
=
Polypropylene |
1
=
Promelt
Beta
Ration
ß = 1000 |
F0 = both sides open
with end caps
F1 = both sides open
F2 = one side open
Code3 (222)
F3 = one side open
with fin Code 8
(222)
F4 = one side open
(226)
F5 = one side open
with fin Code 7
(226) |
A =
without
N = NBR
E = EPDM
F = FPM
P = PTFE
S = FEP/FPM
Q = MVQ |
99,9%
retention rate
001 = 1 µm
003 = 3 µm
005 = 5 µm
010 = 10 µm
025 = 25 µm
050 = 50 µm
075 = 75 µm
100 = 100 µm |
Ordering sample
marked combination:
APM-09P1-F1A-010 |
|