|
|
|
Gaskets |
|
Lid gasket NBR |
1767501000 |
order |
|
Lid gasket FPM |
1767501002 |
order |
|
Lid gasket EPDM |
1767501003 |
order |
|
Lid gasket FEP-O-SEAL, core FPM |
1767501004 |
order |
|
|
|
|
|
Housing parts |
|
Lid (AISI 304) |
on request |
order |
|
Lid screw set (AISI 304) |
1767607000 |
order |
|
|
|
|
|
Internals |
|
Fixing
nut (AISI 316) |
1767502000 |
order |
|
Press
plate 5-cartr. (AISI 316) |
1767403005 |
order |
|
Press plate 7-cartr. (AISI 316) |
1767403007 |
order |
|
Center
post 20" (AISI 316) |
1767404200 |
order |
|
Center
post 30" (AISI 316) |
1767404300 |
order |
|
Center
post 40" (AISI 316) |
1767404400 |
order |
|
End
cap with spring (AISI 316) |
1767505000 |
order |
|
Suitable filter elements: |
Depth filter up to 90%
retention rate
.
.
Depth filter up to 99,9%
retention rate
.
.
Membrane filter cartridges
.
.
Aktivated carbon / adsorption filter
cartridges
.
.
Stainless steel filter cartridges
.
.
Original-Filter cartridges from
3M
.
|
Brief description:
The filter housing type FWK-A2 are cheap welded stainless steel constructions to install 5 or 7 double open end filter cartridges. Alternatively filter cartridges with 222-adaptor (Code 8) can be
used. They consist of a cylindrical vessel with welded boiler dished head. The casted lid is hinged and sealed by an O-ring and closed by eye-bolts. The inlet (N1) is located sidewise to the
shell, the outlet (N2) on the opposite side above the lower boiler dished head. The filter cartridge of the type DOE tight on cutting edge with spring adaptor, the adapter 222-cartridge on a
double O-ring. The filter cartridges are passed through from the outside to the inside. The housings are equipped with welded bottom lugs. |
|