|
|
|
Specifications |
|
Materials |
thermical bonded Polypropylene |
|
Structure |
4-layered depth filter |
|
O-ring material for adaptor cartridges |
Silicone, Fluorcarbone, EPR, Nitrile
and FEP |
|
Max. operating temperature |
60°C |
|
Max. differential pressure at 20°C |
3,2 bar |
|
Max. differential pressure at 60°C |
1,8 bar |
|
Recom. changing differential pressure |
1,5 bar at 60°C |
|
Internal diameter |
nom. 28 mm |
|
External diameter |
nom. 63 mm |
|
Nominelle Abscheideraten (80%) |
0,5, 1, 3, 5, 10, 25,
50, 75 and 100 µm |
|
Deliverable cartridge lengths |
9 7/8", 10", 19
1/2", 20", 29 1/4", 30", 39", 40" |
|
Overview brochure |
PDF-DOWNLOAD |
|
.
> All materialis are certified acc. NSF 42 and FDA CFR part
21< |
The Benefits of the acuraMultiflow |
► Multi layered
structure - This construction allows the filtration differently to big dirty particle in four situations. |
► High flow
rates - Controlled pore structure with unusual low pressure loss and high flow rate. |
► Long service
life - The depth filter structure, the low pressure loss and the high pressure permanence protect the filtration
result and reduce the operating expenses by no long state times. |
► Wide chemical
resistance compatibility - 100% Polypropylene to the filtration of the most different liquids |
► FDA PROOFED
MATERIAL - certificated acc. USP XXIII and FDA CFR
part 21. |
► HUGE
PROGRAM - 5 retention rates from 0,5 up to 100 µm, as well as different construction lengths to 40" and all customary
end caps or adaptor configurations guarantee an optimum solution for many filtration uses. |
Filter design acuraMultiflow |
acuraMultiflow depth filter
cartridges are produced in the Melt-Blown procedures. The
four layered construction occurs through use of different hose nozzles.
Besides, the
Polypropylene fibres and with it also the pore structure become finer and finer from the
outside inwards.
This multi layered construction allows the storage differently to big dirty particle in up to four
situations. This permits a high flow and an extremely long state time with low difference
pressure. |
|
Application areas acuraMultiflow |
► Resins and colors |
► Inks |
► Magnet dispersions and CD-manufacturing |
► Solvents and
fine chemicals |
► Photo emulsions |
► Process chemicals |
► Photo varnish |
► Pre-filtration of
pharmaceutical products |
► Processes in the PCB
indurstry |
► Food and beverage |
► Process water - tank
water |
► Cosmetics |
Ordering informations acuraMultiflow |
Type |
Size |
Material |
Class |
Adaptor |
Gasket |
Micron rate |
AMF
=
acuraMultiflow |
09* =
9 7/8"
10 = 10"
19* = 19 1/2"
20 = 20"
29* = 29 1/4"
30 = 30"
39* = 39"
40 = 40"
* only deliverable
for adaptor F1 |
P
=
Polypropylene |
4
=
four layers |
Standard version:
F1 =
both sides open
On request:
F2 = one side open
Code3 (222)
F3 = one side open
with fin Code 8
(222)
F4 = one side open
(226)
F5 = one side open
with fin Code 7
(226) |
A =
without
N = NBR
E = EPDM
F = FPM
P = PTFE
S = FEP/FPM
Q = MVQ |
80% nominal
retention rate
0005 = 0,5 µm
0010 = 1 µm
0030 = 3 µm
0050 = 5 µm
0100 = 10 µm
0250 = 25 µm
0500 = 50 µm
0750 = 75 µm
1000 = 100 µm |
Ordering sample marked combination:
AMF-09P4-F1A-010 |
|