|
|
|
Specifications |
|
All used materials |
Super-PBT (Polyester) |
|
O-ring material for adaptor cartridges |
Silicone, Fluorcarbone, EPR, Nitrile and FEP |
|
Max. operating temperature |
120°C |
|
Max. differential pressure at 20°C |
4,2 bar |
|
Max. differential pressure at 60°C |
2,1 bar |
|
Max. differential pressure at 80°C |
1,2 bar |
|
Recom. changing differential pressure |
2,1 bar at 30°C |
|
Internal diameter |
nom. 28 mm |
|
External diameter |
nom. 63 mm |
|
Nominal retention rate (80%) |
1, 3, 5, 10, 25,
50, 75 and 100 µm |
|
Deliverable cartridge lengths |
9,87", 10", 19
1/2", 20", 29 1/4", 30", 39", 40" |
|
Overview brochure |
PDF-DOWNLOAD |
|
.
> Certified acc. EU directive 2002/72/EG < |
The Benefits of the acuraPEpro |
► Low difference pressure by optimum surface structure |
► Asymmetric construction, from the outside inwards increasing pore structure |
► Completely from SUPER-PBT with internal supporting core |
► Thermo-sculptural production without addition of glue or binding agent. |
► Retention rates from 1
µm up to 100 µm |
► Stable matrix, thereby high pressure stability |
Filter design acuraPEpro |
acuraPEpro depth filter
cartridges are produced in a patented Melt-Blown procedures. The
unique surface construction linkedly with the inwards increasing pore structure allow a good
particle back position as well as high dirty admission capacity.
The exceptionally stable
matrix also guarantees with rising difference pressure a constantly high efficiency. This
allows the application acuraPEpro in many critical applications in all industrial sectors. |
|
Application areas acuraPEpro |
► Mineral oil |
► Acids and leys |
► Process- and waste
water |
► Solvents, reagents and
puffer |
► Covering baths and
fine chemicals |
► Movie and
paper covering |
► Chemicals |
► cosmetics |
► Varnish and paints |
► Pre-filtration of
pharmaceutical products |
► Photo resist |
► Food and beverage |
Ordering informations acuraPEpro |
Type |
Size |
Material |
Class |
Adaptor |
Gasket |
Micron rate |
APE
=
acuraPEpro |
09 =
9,87"
10 = 10"
19 = 19 1/2"
20 = 20"
29 = 29 1/4"
30 = 30"
40 = 40" |
P
=
Super-PBT |
1
=
PEpro |
F0 = both sides open
with end caps
F1 = both sides open
F2 = one side open
Code3 (222)
F3 = one side open
with fin Code 8
(222)
F4 = one side open
(226)
F5 = one side open
with fin Code 7
(226) |
A =
without
N = NBR
E = EPDM
F = FPM
P = PTFE
S = FEP/FPM
Q = MVQ |
80% nom.
retention rate
0010 = 1 µm
0030 = 3 µm
0050 = 5 µm
0100 = 10 µm
0250 = 25 µm
0500 = 50 µm
0750 = 75 µm
1000 = 100 µm |
Ordering sample marked combination:
APE-09P1-F1A-0100 |
|