|
|
|
Specifications |
|
Materials |
Polypropylene (PP) I Polyester (PBT) |
|
Structure |
Depth filter matrix |
|
Gaskets |
none |
|
Max. operationg temperature |
PP:
80°C I PBT: 100°C |
|
Max. differential pressure at 20°C |
PP:
2.4 bar I PBT: 2.4 bar |
|
Recom. differential pressure |
1.5 bar |
|
Filter area |
EXT1200
: 0.38 m2 |
|
External diameter |
nom. 152 mm |
|
Nom. retention rates |
1, 5,
10, 20, 50, 75, 100 µm |
|
Deliverable element lengths |
suitably for element filter
housings "EXT" |
|
Installation |
Types: 4, 6,
8BFOSEXT |
|
Overview brochure |
PDF-DOWNLOAD |
|
.
The Benefits of the acuraMeltflow
PRO+ EXTENDED |
|
► CLEAN
FILTER SYSTEM - All dirt particles are held back inside of the filter
element and reach also with the filter change not in the pure space. |
► HIGH FLOW
RATES - Controlled pore structure with unusual low
pressure loss and high flow rate. |
► LONG SERVICE
LIFE - The radial folds and the low pressure loss
linkedly with a high dirty admission capacity protect the filtration result
and reduce the operating expenses by long state times. |
► WIDE CHEMICAL
COMPATIBILITY - 100% Polypropylene or 100%
polyester for the filtration
of different liquids. |
► WIDE
SPECTRUM OF FILTER MICRON RATES - Filter delicacies of
1 µm
to 100 µm guarantee an optimum solution for many filtration uses. |
Filter design acuraMeltflow
PRO+ EXTENDED |
acuraMeltflow
PRO+ EXTENDED
High Performance Filter combine
the advantages of conventional filter bags and filter cartridges in
one filter element. The thermally bonded
graded-density structure
of this polymere depth cartridge is functioned with coarse
fiber in the inner layer and fine fiber in the outer layer. This
structure
allows the retaining of dirt particles with different sizes.
Similar to
the filter bag, the filtration will be from the inside to the
outside. While replacing the filter element, all dirt particles will
retain inside
the filter element and avoid a contamination of the
clean side of the filter housing. |
|
|
acuraFlex
PRO+ EXTENDED - Technology
Proven premium technology with an even longer service life
thanks to an extended design.
Up to 50% more filter area compared to
the high performance elements of size 2.
Dirt holding capacity: up to 40 kg per element |
Application areas acuraMeltflow
PRO+ EXTENDED |
► Varnish and
coverings |
► Oxidation baths |
► Drinking water |
► Inks and paints |
► Pharmaceutical products |
► Petro chemical |
► Cosmetics and
food |
► Organical solvents (alcohole etc.) |
► Process water |
► Arenes |
► Cleaning baths |
►
Magnet band suspensions |
UPGRADE MADE EASY -
EXTEND YOUR PROCESS |
identical connection dimensions for easy replacement (left: 4BFOS-EXT1200; right: 4BFOS2)
> 50% more filter area with the same footprint and only approx. 300 mm higher
Ordering informations acuraMeltflow
PRO+ EXTENDED |
Element
size |
Type |
Material |
Micron rate |
EXT1200 =
nom. 1200 mm
EXT2000 = nom. 2000 mm |
MF
=
acuraMeltflow
PRO+ |
P
= Polyproyplene
PBT = Polyester |
001 = 1 µm
005 = 5 µm
010 = 10 µm
020 = 20 µm
050 = 50 µm
075 = 75 µm
100 = 100 µm |
Ordering sample marked combination:
EXT1200-MFP-010 |
|