|
|
||||||||||||||||||||||||||||||||||||||||||||
| Special constructions are in all lengths up to 50" available I all materials FDA are listed |
| The Benefits of the BetapureTMAU |
|
► ROBUST AND
SELF-FIXING - In the inside the fibers welded together in very high density with each other prove a firm structure which admit a difference pressure of 5.5 bar and make an additional supporting body superfluous. |
| ► HIGH FLOW RATES - Controlled pore structure with high permeability prove unusual low pressure loss and high flow rates. |
|
► LONG SERVICE
LIFE - the depth filter structure, the low pressure loss and the high pressure permanence protect the filtration result and reduce the operating expenses by long state times. |
|
► WIDE CHEMICAL
RESISTANCE COMPATIBILITY - this allows the
BetapureTMAU application for the filtration of the most different liquids. |
| ► FDA PROOFED MATERIAL - No glues or net means are used in the production. |
|
► HUGE
PROGRAM - 5 retention rates from 5 up to 200 µm, as well as different construction lengths to
40" and all customary end caps or adaptor configurations guarantee an optimum solution for many filtration uses. |
| Filter design BetapureTMAU | |
|
The newest advanced technologies during the fiber production made the development of these long bi component fibres which exist by a core of Polypropylene and a sheath from Polyethylene, only possibly. The fibers can be welded together by the different glaze points of these both materials in her crossroad points with each other thermally, without a shrivelling of the Polypropylene and therefore the filter matrix must be accepted. This process requires no net means or binding agent. The structural high firmness conditioned by the construction protects steady filtration qualities also under high axial pressure. |
 |
| Application areas BetapureTMAU | |
| ► Resins and paints | ► Inks |
| ► Magnet band suspensions | ► Fine chemicals |
| ► Photo emulsions | ► Process chemicals |
| ► Flushing, process and drinking water | ► Pre-filtration of pharmaceutical products |
| ► Photo varnish | ► Food and beverage |
| ► Pure water | ► Cosmetics |
| Ordering informations BetapureTMAU | |||||
| Type | Length | Micron rates | Material | Adaptor configuration | O-ring |
|
AU = BETA-PURE |
09
= 9 3/4" 10 = 10" 19 = 19 1/2" 20 = 20" 29 = 29 1/4" 30 = 30" 39 = 39" 40 = 40" 50 = 50" |
80% (nom.) retention rates A = 3 µm* B = 5 µm C = 10 µm E = 20 µm G = 30 µm L = 50 µm Q = 75 µm V = 100 µm W = 125 µm X = 200 µm * only for Polyester |
11
= PP/PE 12 = Polyester** **only in 3, 5, 10, 20 and 30 µm deliverable |
B = 226-O-ring Code 7 one side open C = 222-O-ring one side open D = flat gasket 10" both sides open E = flat gasket 9 3/4" both sides open F = 222-O-ring Code 3 one side open N = both sides open |
A = Silicone (MVQ) B = Fluorcarbone (FPM) C = EPDM D = Nitrile (NBR) G = PE-flat gasket N = without |
| Ordering sample marked combination: AU 09 B 11 EB | |||||
| Packing content: 30 pcs. sterile packed | |||||
| Ordering informations BetapureTMAU Typ-Z | |||||
| Type | Length | Material | Adaptor configuration | O-ring | Micron rates |
|
AU = BETA-PURE |
09
= 9 3/4" 10 = 10" 19 = 19 1/2" 20 = 20" 29 = 29 1/4" 30 = 30" 39 = 39" 40 = 40" 50 = 50" |
Z13
= Polyolefin/ glass Z11 = Polyolefine |
B = 226-O-ring Code 7 one side open C = 222-O-ring one side open D = flat gasket 10" both sides open E = flat gasket 9 3/4" both sides open F = 222-O-ring Code 3 one side open N = both sides open |
A = Silicone (MVQ) B = Fluorcarbone (FPM) C = EPDM D = Nitrile (NBR) G = PE-flat gasket N = without |
99,9% (abs.) retention rate 020 = 2 µm 030 = 3 µm 050 = 5 µm 070 = 7 µm 100 = 10 µm 120 = 12 µm 150 = 15 µm |
| Ordering sample marked combination: AU 09 Z13 EB 070 | |||||
| Packing content: 30 pcs. sterile packed | |||||
| Suitable filter housings | |
  |
Profit from our long-standing experience with the interpretation of filter systems! We lay out your filter according to economic and economic criteria free of charge. |
 |
 |