|
|
|
Specifications |
|
Materials |
Polypropylene (PP) I Polyester (PBT) |
|
Structure |
Depth filter matrix |
|
Gaskets |
none |
|
Max. operating temperature |
PP:
80°C I PBT: 100°C |
|
Max. differential pressure at 20°C |
PP:
2,4 bar I PBT: 2,4 bar |
|
Recom. differential pressure |
1,5 bar |
|
Filter area |
sz. 1 : 0,1 m2
I sz. 2 : 0,25 m2 |
|
External diameter |
nom. 152 mm |
|
Nom. retention rates |
1, 5,
10, 20, 50, 75, 100 µm |
|
Deliverable element lengths |
suitably for
bag filter housings size 1 and 2 |
|
Installation |
with standard
support basket |
|
Overview brochure |
PDF-DOWNLOAD |
|
.
The Benefits of the acuraMeltflow
PRO+ |
|
► CLEAN
FILTER SYSTEM - All dirt particles are held back inside of the filter
element and reach also with the filter change not in the pure space. |
► HIGH FLOW
RATES - Controlled pore structure with unusual low
pressure loss and high flow rate. |
► LONG SERVICE
LIFE - The radial folds and the low pressure loss
linkedly with a high dirty admission capacity protect the filtration result
and reduce the operating expenses by long state times. |
► WIDE CHEMICAL
COMPATIBILITY - 100% Polypropylene or 100%
polyester for the filtration
of different liquids. |
► WIDE
SPECTRUM OF FILTER MICRON RATES - Filter delicacies of
1 µm
to 100 µm guarantee an optimum solution for many filtration uses. |
Filter design acuraMeltflow
PRO+ |
acuraMeltflow
PRO+
High Performance Filter Elements combine
the advantages of conventional filter bags and filter cartridges in
one filter element. The thermally bonded
graded-density structure
of this polymere depth cartridge is functioned with coarse
fiber in the inner layer and fine fiber in the outer layer. This
structure
allows the retaining of dirt particles with different sizes.
Similar to
the filter bag, the filtration will be from the inside to the
outside. While replacing the filter element, all dirt particles will
retain inside
the filter element and avoid a contamination of the
clean side of the filter housing. |
|
|
acuraFlex
PRO+ - Technology
The element can be installed in every standard bag filter
housing without an additional
support adaptor with the novel support collar acuraFlex
PRO+
. Optionally a magnet bar
can be insert to increase the service life of the element.
INSTALLATION NOTE
If you are using a non-standardized bag filter housing (various manufacturers), please
ask our technical staff whether you can use this High Performance Element without an
additional length-adjustment adaptor. A length compensation adapter can
easily be setup
for the housing which differs from the standard. |
Application areas acuraMeltflow
PRO+ |
► Varnish and
coverings |
► Oxidation baths |
► Drinking water |
► Inks and paints |
► Pharmaceutical products |
► Petro chemical |
► Cosmetics and
food |
► Organical solvents (alcohole etc.) |
► Process water |
► Arenes |
► Cleaning baths |
►
Magnet band suspensions |
Changeover from filter bags to
acuraMeltflow PRO+ |
|
|
|
|
remove standard filter bag |
install acuraMeltflow
PRO+ |
Optional: insert
Magnet bar |
ready! |
Ordering informations acuraMeltflow
PRO+ |
Bag Size |
Type |
Material |
Micron rate |
1 = sz.1
2 = sz.2 |
MF
=
acuraMeltflow
PRO+ |
P
= Polyproyplene
PBT = Polyester |
001 = 1 µm
005 = 5 µm
010 = 10 µm
020 = 20 µm
050 = 50 µm
075 = 75 µm
100 = 100 µm |
Ordering sample marked combination:
2-MFP-010 |
|