Specifications     Materials filter bag Polypropylene micro fibres     Material collar Polypropylene     Max. operat. pressure Polypropylene 82°C     Max. differential pressure 2,5 bar     Max. flow rate bag size 1 7 m3/h at 25 µm micron rate     Max. flow rate bag size 2 16 m3/h at 25 µm micron rate     Deliverable micron rates 0,2 up to 200 µm     Filter area 0,25 up to 0,50 m2   Overview brochure PDF-DOWNLOAD . > You take the exact flow rates in dependence of filter delicacy please from the single prospectuses <  The Benefits of the ULTRAFIT®   ► COMPLETELY MADE OF POLYPROPYLENE - The ULTRAFIT® filter bags are made exclusively out of Pure Polypropylene in        a quality free of fiber and correspond to the FDA-CFR21 regulations.   ► WELDED CONSTRUCTION - By a special ultrasonic technology they become ULTRAFIT® filter bags completely welded.   ► HIGH RETENTION RATES - The guaranteed produce-efficiency reaches up to 99.98% (beta 5000) with filter delicacies       under 1 µm.   ► MULTI-LAYERED CONSTRUCTION - Calibrated construction with up to 7 filter situations in fabric-reinforced implementation       available.   ► SERIOUS SEALING - By the patented Zero-BypassTM closure collar.   ► GOOD REPLACEABLE - The ULTRAFIT® filter bags fit in all common bag filter housings  Filter design ULTRAFIT®   The ULTRAFIT® high-capacity filter bags are produced after a patented   production procedure and thereby reach a new standard in the filtration   technology.   By three unique bag series (100 - 500 - 800) the user has the possibility to   cover nearly all use applications.   The completely welded together ULTRAFIT® filter bag from several situations of a Polypropylen of glaze fiber fleece are free of   leakages, without any seams with needle sting holes. Also the crossing to the patented Zero-BypassTM locking collars is thanks   to the ultrasonic welding freely from bypasses and seals the filter bag in the case reliably. The extremely high efficiency reach the   ULTRAFIT® filter bag by an also patented laminate process. On this occasion, the different gradations multi layered Polypropylene   micro fibres fleece are welded together and thereby reach a retention rate from up to 99. 98% (beta 5000).  Application areas ULTRAFIT®   ► Varnish and coverings   ► Beverage filtration   ► Drinking water   ► Inks and paints   ► Pharmaceutical products   ► Petro chemicals   ► Cosmetics and food   ► Organical solvents (alcohole etc.)   ► Process water   ► Arenes   ► Catalyst recovery   ► Magnet band suspensions  Filter bags in overview Bag size 2 Bag size 1   Beutelgröße 3 Filter area: 0,5 m2 Filter area: 0,25 m2   Filterfläche: 0,07 m2 Ø bag: 178 mm Length bag: 840 mm Ø bag: 178 mm Length bag: 400 mm    Ø bag: 102 mm Length bag: 350 mm    Ø Beutel: 102 mm Länge Beutel: 223 mm  High Performance Bag Filter Series ULTRAFIT®   Bag filter-Series   Bag structure and application references    ULTRAFIT® 100   This filter bag is suited for the filtration with a middle solid load and for the sewage filtration in the   batch use. The structural construction passes of 3 filter situations and 2 supporting situations as well as   a (IP) fabric strengthening for a higher difference pressure load. These filter bags with retention rates of   1 - 200 µm are available with an efficiency of 97%.   ULTRAFIT® 500   The series 500 is conceived especially for the demanding filtration with "High-Purity" demands. An   additional smoothing of the flow mesh prevents the drift of fibers in the filtrate. The bag structure passes   of 6 filter situations, 2 supporting situations as well as a (IP) fabric strengthening for a higher difference   pressure load. The available retention rates with an efficiency of 99% lie between 0.5 and 50 µm.   ULTRAFIT® 800   For the critical filtration where validated and reproduceable results are necessary in sub micronical   retention area the series 800 was developed. Their structural construction exists of 7 filter situations,   3 supporting situations as well as an flow mesh free of fiber. Absolute retention rates of 0.2 - 0.4 - 0.6   and 0.8 µm are available with an efficiency of 99.98% (beta 5000).   IP-Serie   The integrated external fabric strengthening (Polypropylene monofil) serves for the rise of the difference   pressure permanence infers with a raised solid load capacity. With the ULTRAFIT ® series 100, 500   and 800 this fabric strengthening is production.  Ordering informations ULTRAFIT® Series Material Micron rated Bag length at bag size Addition 100 500 800 P = Polypropylen     001 =     1 µm     002 =     2 µm     005 =     5 µm     010 =   10 µm     025 =   25 µm     050 =   50 µm     075 =   75 µm     100 = 100 µm     100 = 200 µm     02 =     0,2 µm (800)     04 =     0,4 µm (800)     06 =     0,6 µm (800)     08 =     0,8 µm (800)      P1 = 400 mm *      P2 = 840 mm       * only for series 100 deliverable EXP = Sunmicron-style for Serie 500 Standard at series 800 (0,2 µm) IP =   external mesh reinforcment Polypropylene or Polyester  Ordering sample marked combination: 100-P-010-P2-IP  Suitable filter housings Profit from our long-standing experience with the interpretation of filter systems! We lay out your filter according to economic and economic criteria free of charge.