|
|
|
Specification |
|
Type |
FUHRMATIC 700L I 1000L I SE1000L |
|
IN/OUT |
Rp 1 1/2" I Rp 2" or acc. needs |
|
Drain |
Rp 1 1/4" I Rp 2" or acc. needs |
|
Flow rate |
up to 48 m3/h |
|
Unit material |
Stainless steel 1.4301 or steel coated |
|
Gaskets |
gasket free |
|
Power Supply |
400 VAC, 50 Hz |
|
Control power |
24 VAC, 50 Hz |
|
Safety class |
IP65 |
|
Control |
IEC 204/1 |
|
Belt width |
700 mm I 1000 mm |
|
Overview brochure |
PDF-DOWNLOAD |
|
Brief description:
The FUHRMATIC belt filters have a filter-bed ordered at an angle. By the higher hydrostatic pressure better throughput performances, more effective cake formation and quite a long stand times therefore arise. The filter belt seals up independently and is raised with a windlass at the filter exit on a role again. The filter cake is taken off about a scraper into an on-catch container. The belt transport is carried out via a gear engine and gets controlled by means of swimmer switches. All medium touched parts are manufactured from high-grade steel. |
The Benefits From FUHRMATIC
Automatic Belt Filter Units |
► Filtration up to
particle size of 10 µm |
|
► Flow rate up to 48 m3/h per belt filter unit |
► 100% efficiency of
the filter media |
► Wiping of the
processed filter media |
► Simple removal of the
coiled up media |
► Media touched
materials are made in stainless steel |
► Simple cleaning |
► Full-automatic
filteration process |
► Large range of
accessories |
Flow rate of FUHRMATIC
Automatic Belt Filter Units |
FUHRMATIC 700L |
250 l/min.
measured with clear water* |
FUHRMATIC 1000L |
400 l/min. measured with clear water* |
FUHRMATIC SE1000L |
700 l/min. measured with clear water* |
Design Of FUHRMATIC Automatic Belt Filter Units |
The liquid is distributed by the cascade finish box on the filter medium.
A liquid column which produces the one to the filtration's required
pressure is built up here. If the liquid column caused by the pollution
of the filter medium rises, the pushing forward of the filter material is
activated automatically. The filter cake is pulled out of the liquid and taken
off about a scraper into the collecting container. The filter medium taken
advantage of is rolled up separately and can be disposed of easily.
|
|
BELTSKIMMER-Additional Kit For FUHRMATIC Automatic
Belt Filter Units |
Application Areas
The beltskimmer is used everywhere there where not emulsified oils
and pollution particles are separated from process liquids.
He is
primarily used by cleaning of cooling smearing substances for metal
processing machines and alkaline degreasing baths. However, he is
also suitable for cleaning of process liquids at which free oils are on the
liquid surface, e.g. car-washes.
Function
The beltskimmer drives an endless
oil charge belt.
Oil floating up sticks
to the ribbon, is taken off in the beltskimmer and flows into a storage tank.
According to the given requirements different ribbon lengths are eligible
for office.
Benefits
►Compact design
►Media temperature in
the skimmer up to 90°C possible
►Chemical resistance
►Simple, smooth installation
►Full-automatical
operation
►Handy,
non-complicated transfer and easy cleaning
by the use of unit door
►No bacterium growth in
the belt skimmer
►Smart handling
►High storage tank in
seperate reservoir
Technical Parameter
Belt length from 600-2000 mm
max.
capacity ca. 5 l/h oil charge
Power
supply: 230 Volt
|
|
MAGNET FILTER-Additional Kit For FUHRMATIC
Automatic Belt Filter Units |
Application Areas and Function
The magnet filter is used for the fully automatic, continuous cleaning of
liquid media by ferromagnetic substances. The magnet filter consists of
a high-grade steel case with a magnet roller driven electrically which is
jacketed with a thin-walled high-grade steel hull. He optionally is from
arming destitute of high performance magnets with neodymium and can
be adapted by his modular style to given place conditions individually.
The floating particles situated in the liquid are conducted past together
with the liquid at the magnet roller contrary to the direction of rotation.
Ferromagnetic substances stick and are delivered by means of a touch
free scraper. An optional support roller at the magnet roller separates
the liquid from the pollutions.
Benefits
► High effecienzy filtration
► Modular adaptable
unit
► Low working costs
► Low-wear and
low-maintenance
► High filtration power
Technical Parameter
Flow rate from ca. 63 - 1500 l/min
|
|
|